SEYI Straight Side Crank Link Press (SLG Series)
SEYI Straight Side Crank Link Press (SLG Series)
大工件成型加工首选设备 ─ SLG系列，适用于汽车钣件成型。采用曲轴连杆传动齿轮机构，冲压成型时柔性接触，大量减少震动、噪音及高热，延长镆具寿命。低耗能设计，有效节能20%以上。大工件成型加工首選設備 ─ SLG系列，適用於汽車鈑件成型。採用曲軸連桿傳動齒輪機構，衝壓成型時柔性接觸，大量減少震動、噪音及高熱，延長鏌具壽命。低耗能設計，有效節能20%以上。This series is the prime choice for large parts forming, which makes it applicable for automotive parts forming. The crank shaft and connecting rods are adopted to drive the gear component. The soft contact during forming extensively reduces vibration, noise and heat, as well as extending die lifetime. The design of low energy consumption can effectively save more than 20% of energy.
Description
• Designed with tie-rod structure on the frame and adopting gear driving component with four connecting rods, the rigidity of main body increases extensively.The soft contact during press forming extensively reduces vibration, noise and heat, as well as extending die lifetime.
• The combination of pneumatic die cushion for big tonnage with tightening and adjusting component can address the needs for different stroke and action.
• With the use of high torque wet clutch/ brake, the lifetime of clutch increases and environmental protection is ensured.
• The highly respondent Hydraulic Overload Protector (HOLP) can effectively fix die stuck and prevent overloading.
• The human-machine interface can precisely control the stroke and pressure applied onto the die cushion. With PLC monitoring, the status of machine usage can be controlled at all times.
Service Hotline 400-889-8282 
