Sandsun PC板衝孔脱料系統

特點：   此系統利用油壓作動脱料盤脱料，不同於傳統機械式結構，避免板材、模具受衝牀大力撞擊，可減少衝針斷裂，延長模具使用壽命。 脱料及壓板使用壓力，可依PC板之規格、材質作簡易的調整。 具有壓板功能，可避免衝孔時造成龜裂、剝離、產生鋸齒狀。 配備快速換模系統，可縮短換模時間，確保人員操作安全。 附脱料位置選擇開關，可分： (1)0o脱料：衝孔完成，衝牀滑塊上升至9點方向以上(可調整)才脱料。 (2)180o脱料：衝孔完成，直接於下死點脱料  Features：   This system employs hydraulic pressure for activating the plate to knock out.It is totally different from the conventional mechanical structure,and can prevent the board and the dies from being heavily impacted by the press,thus minimize the breaking of pierce pin and prolong the dies service life. Simple adjustment can be made for the operating pressure for knock out and holder according to the P.C. board materials and specifications. Holder function is provided in order to avoid cracking,flaking and burr during hole piercing. Qucik die change system is equipped in order to minimize the dies changing time and ensure the working safety. Equipped with knock out position selector switch for: (1)0o knock out:When holes pierced,the press slide upward rapidly to 9 o'clock direction(adjustable) for knock out. (2)180o Knock out:Knock out is done directly at lower dead point when holes pierced.