Hartford ALL NEW INFINITY/ HSA series

Z軸四綫軌 • HSA四綫軌三面拘束結構專利技術，雙向支撐提供高的剛性，為您的切削帶來絕佳的剛性表現。 (HSA2212/3212/2215四綫軌為選配，其餘機台為標配) X軸三綫軌設計-HSA-X28/HSA-X36 • X軸三綫軌設計，比二綫軌多出一組綫軌，可用以抵抗加工旋轉扭矩，提升50%以上的剛性，且工作台最大載重量可達30,000KG，滿足您的加工需求，協助您達到精度以及品質上要求。 全新斜背式設計橫樑，有效降低切削震動 • 斜背式設計克服了傳統式橫梁結構易於加工時產生震動的缺陷。全新的斜背式設計，可透過45 °，向下延伸到立柱的斜背式設計橫樑，將加工時的力流導向至地面，有效將加工時所產生的振動降至最低，提升加工時的精度及表面光潔度。專利:M435318 橫樑後方斜背式設計。 螺杆支撐機構，保持絕佳定位精度 • 透過專利技術，螺杆支撐機構可有效於X及Y軸傳動時確保動力的維持。同時也有效改善螺杆自重下垂，進而提高定位精度及螺杆使用壽命。同時螺杆規格加大一級，靜剛性表現極佳。5m以上機型為標準配置，4m以下機型為選配： Y軸支撐機構，X36/EAY為標準配置 Y軸支撐機構，X23/X27/X28為選配 Z軸氮氣蓄壓配重系統 • Z軸快送可提升至16m/min並且有效降低油壓箱運轉噪音。油壓箱油溫可降低50%並且有效節能20%以上並可提升高速切削Z軸換向穩定度(適用於HSA-X20/X23/X27/X32/X36。 立柱前跨設計 • 有效傳遞最大切削力道，使整體立柱結構可承受較大的切削力，更有效的傳遞切削力道，並降低整體切削震動Four linear guideways on Z-axis +With the design of four linear guidewasys on Z axis, the machine rigidity is higher and th e cutting performance is much better. (For HSA2212/3212/2215, four linear guideways  is optional, the rest machines is standard.) Three linear guideways on X axis (HSA-X28/HSA-X36) +The design of three linear guideways on X axis can resist the rotation torque when cutting, the rigidity can be increased by 50%. Furthermore, the max. load of table can be up to 30,000kg.  Reduced cutting vibration with new force flow design +New slant beam design redirects the cutting force flow at 45 ° down into the columns, significantly reducing vibration through efficient force flow transfer. Maximum transmission power enhanced positional accuracy +Our patented X and Y axis ballscrew support coupled ensure the transmission power is delivered at min. los whilst also minimising deflection issues to enhance your machining accuracy. Nitrogen counter balance  +With the design of nitrogen counter force on Z-axis, the noise problem of hydraulic unit can reduce to 72dB, also the temperature of oil tank can reduce to 35℃. Furthermore, Z axis rapid traverse can be upgraded to 16m/min.