Hartford Plug & Play MVP series

Z轴伺服马达升级，无配重平衡块(选配,MVP-16无此选项) • 特殊机构设计，在高速加工时，展现高精密的Z轴运动。 超大立柱 • 立柱底部宽度1100mm(MVP-8/10)，独特设计的立柱结构，比竞争机种更重更稳定。超大立柱底座结构体，并以筋骨强化，荷重能力提升，无工作台悬垂问题，能应用于搪铣加工，提升加工精度。 工作台导水槽 • 工作台两侧附导水台。 一体式油水分离机构 特殊设计的高效能油水分离机构，为一体式结构设计，并加入环保概念，避免切削液变质之恶臭问题。超宽底座。 • 1600mm(MVP-8/10): 采用米汉纳铸铁一体成形，具稳定、高刚性、坚固特色。提供最稳固的荷重支撑能力，且工作台不悬垂。配合各轴强化设计，将刚性与稳定性发挥至极致。 MVP-13/16 三轴φ50滚珠螺杆 • 所有螺杆配置在机构中央，螺杆两端采用精密斜角滚珠止推轴承支撑。所有伺服马达附有绝对式译码器，以提升效率及性能可靠性(FANUC & MITSUBISHI控制器)。Z轴伺服马达升级，无配重平衡块(选配,MVP-16无此选项) • 特殊机构设计，在高速加工时，展现高精密的Z轴运动。 超大立柱 • 立柱底部宽度1100mm(MVP-8/10)，独特设计的立柱结构，比竞争机种更重更稳定。超大立柱底座结构体，并以筋骨强化，荷重能力提升，无工作台悬垂问题，能应用于搪铣加工，提升加工精度。 工作台导水槽 • 工作台两侧附导水台。 一体式油水分离机构 特殊设计的高效能油水分离机构，为一体式结构设计，并加入环保概念，避免切削液变质之恶臭问题。超宽底座。 • 1600mm(MVP-8/10): 采用米汉纳铸铁一体成形，具稳定、高刚性、坚固特色。提供最稳固的荷重支撑能力，且工作台不悬垂。配合各轴强化设计，将刚性与稳定性发挥至极致。 MVP-13/16 三轴φ50滚珠螺杆 • 所有螺杆配置在机构中央，螺杆两端采用精密斜角滚珠止推轴承支撑。所有伺服马达附有绝对式解码器，以提升效率及性能可靠性(FANUC & MITSUBISHI控制器)。Z-axis servo motor coupled directly to ballscrew +No more Z-axis timing belt, the servo is connected to the ballscrew. There is no more need to maintain or replace the timing belt. Z-axis servo motor upgraded and no counter-balance block (opt.) +Special package to improve the precision of Z-axis movement in high speed machining. Greater column +1100mm (MVP8/10) wide column case. The column on the MVP features a heavier structure than competing models to upgraded stability.The column and base are oversized fully ribbed to support heavy loads without table deflection. +Drain through built-in on working table. Incorporated oil fluid separation on casting design +Eco-friendly design. Efficient oil and fluid separation incorporated on casting design prevents cutting fluid deterioration. 1600mm oversized base +One piece Meehanite casting which is stable, rigid and rugged. To ensure maximum rigidity, the MVP-8 and MVP-10 are built on heavy duty Meehanite casting. Also, all axes are reinforced to provide upper most rigidity and stability. φ50 ballscrews on 3 axes(MVP-13) +All ballscrews are center mounted and supported on both ends by high precision angular contact thrust bearing. All servo motors with absolute encoders for increasing efficiency and dependability. (FANUC and Mitsubishi only)