Hartford ALL NEW INFINITY/ HSA series

Z轴四线轨 • HSA四线轨三面拘束结构专利技术，双向支撑提供高的刚性，为您的切削带来绝佳的刚性表现。 (HSA2212/3212/2215四线轨为选配，其余机台为标配) X轴三线轨设计-HSA-X28/HSA-X36 • X轴三线轨设计，比二线轨多出一组线轨，可用以抵抗加工旋转扭矩，提升50%以上的刚性，且工作台最大载重量可达30,000KG，满足您的加工需求，协助您达到精度以及品质上要求。 全新斜背式设计横梁，有效降低切削震动 • 斜背式设计克服了传统式横梁结构易于加工时产生震动的缺陷。全新的斜背式设计，可透过45 °，向下延伸到立柱的斜背式设计横梁，将加工时的力流导向至地面，有效将加工时所产生的振动降至最低，提升加工时的精度及表面光洁度。专利:M435318 横梁后方斜背式设计。 螺杆支撑机构，保持绝佳定位精度 • 透过专利技术，螺杆支撑机构可有效于X及Y轴传动时确保动力的维持。同时也有效改善螺杆自重下垂，进而提高定位精度及螺杆使用寿命。同时螺杆规格加大一级，静刚性表现极佳。5m以上机型为标准配置，4m以下机型为选配： Y轴支撑机构，X36/EAY为标准配置 Y轴支撑机构，X23/X27/X28为选配 Z轴氮气蓄压配重系统 • Z轴快送可提升至16m/min并且有效降低油压箱运转噪音。油压箱油温可降低50%并且有效节能20%以上并可提升高速切削Z轴换向稳定度(适用于HSA-X20/X23/X27/X32/X36。 立柱前跨设计 • 有效传递最大切削力道，使整体立柱结构可承受较大的切削力，更有效的传递切削力道，并降低整体切削震动Four linear guideways on Z-axis +With the design of four linear guidewasys on Z axis, the machine rigidity is higher and th e cutting performance is much better. (For HSA2212/3212/2215, four linear guideways  is optional, the rest machines is standard.) Three linear guideways on X axis (HSA-X28/HSA-X36) +The design of three linear guideways on X axis can resist the rotation torque when cutting, the rigidity can be increased by 50%. Furthermore, the max. load of table can be up to 30,000kg.  Reduced cutting vibration with new force flow design +New slant beam design redirects the cutting force flow at 45 ° down into the columns, significantly reducing vibration through efficient force flow transfer. Maximum transmission power enhanced positional accuracy +Our patented X and Y axis ballscrew support coupled ensure the transmission power is delivered at min. los whilst also minimising deflection issues to enhance your machining accuracy. Nitrogen counter balance  +With the design of nitrogen counter force on Z-axis, the noise problem of hydraulic unit can reduce to 72dB, also the temperature of oil tank can reduce to 35℃. Furthermore, Z axis rapid traverse can be upgraded to 16m/min.